E-Bodies.org Cuda Challenger Forum
- Welcome to E-Bodies.org Cuda Challenger Forum.
Recent posts
#1
M
Parts / Misc For Sale / Re: 70 Cuda Road Lamp Wiring
Last post by mike ketterer - Today at 07:00:15 PMill take the road light wiring. it wont let me send you a pm
#2
Your Restoration project (ROSEVILLE MOPARTS) / Re: 1970 Barracuda Reanimated.
Last post by Marty - Today at 05:30:15 PMI pulled out the rear interior panels after years of storage. These were not original to the Barracuda since the interior originally was blue. I have no idea if these are original or repro's, but once all the dust and dirt was removed, they were in excellent condition. No cracks, scratches or the usual deterioration. Even the screw holes were intact. The only thing I noticed was, there were some traces of gray and red overspray on the left one.
I reconditioned the panels:
Washed off the dirt with a soft brush.
Scrubbed the plastic with a red Scotch-Brite and AJAX.
Wiped the panels clean then re wiped with a Prep-All surface cleaner.
Wiped again with a water base cleaner to defuse the static.
Applied two coats of Adhesion Promoter. Five-minute flash.
Applied two coats of SEM Landau black.
Let it dry overnight.
Wrapped the wire harness with vinyl harness tape and secured it to the inner wheel well.
I installed the moisture barriers using 3M Strip-Caulk and duct tape.
Installed the interior panels using new hardware.
Installed the seat belts and rear seat.
1971 'Cuda.
The engine completed.
I reconditioned the panels:
Washed off the dirt with a soft brush.
Scrubbed the plastic with a red Scotch-Brite and AJAX.
Wiped the panels clean then re wiped with a Prep-All surface cleaner.
Wiped again with a water base cleaner to defuse the static.
Applied two coats of Adhesion Promoter. Five-minute flash.
Applied two coats of SEM Landau black.
Let it dry overnight.
Wrapped the wire harness with vinyl harness tape and secured it to the inner wheel well.
I installed the moisture barriers using 3M Strip-Caulk and duct tape.
Installed the interior panels using new hardware.
Installed the seat belts and rear seat.
1971 'Cuda.
The engine completed.
#3
i like the look and seems like a nice ride ... no tag or sheet tho..
https://www.ebay.com/itm/364874947665?itmmeta=01HX59KMJ7Y0YMQBC9DWWGSX3D&hash=item54f43ddc51:g:8MYAAOSwMGJmNbwL&itmprp=enc%3AAQAJAAAA4Prgw2U3trAF4t5Bm43Pm3HGk9XGzzEeJUEN6RDq6g3it6bxAIpnqMuqFUYrVfkkijyr2IMQB4M93glk3Rz96Tjiwe5BG2tHzt0RCTsHu%2Fm98z4mB%2B6cuo99RtqaE2QhCWVHpnYFj%2FYECiZ6ve7ZN%2Fwzt1AHjPmi8PtNTMachI3BT%2BJ38UevMlM9vgeu4nvdA8OBSdQoL0ixljuzLjm3qBIzSwKo6Thrwvzn8KkE15hVYHOxEcAeuq4En4lCMBIAbne6Ph00cYbz2lEw%2BRFrARoJ%2FxsZwyGaMiFsSBsiaBwQ%7Ctkp%3ABk9SR5jJzqnpYw
https://www.ebay.com/itm/364874947665?itmmeta=01HX59KMJ7Y0YMQBC9DWWGSX3D&hash=item54f43ddc51:g:8MYAAOSwMGJmNbwL&itmprp=enc%3AAQAJAAAA4Prgw2U3trAF4t5Bm43Pm3HGk9XGzzEeJUEN6RDq6g3it6bxAIpnqMuqFUYrVfkkijyr2IMQB4M93glk3Rz96Tjiwe5BG2tHzt0RCTsHu%2Fm98z4mB%2B6cuo99RtqaE2QhCWVHpnYFj%2FYECiZ6ve7ZN%2Fwzt1AHjPmi8PtNTMachI3BT%2BJ38UevMlM9vgeu4nvdA8OBSdQoL0ixljuzLjm3qBIzSwKo6Thrwvzn8KkE15hVYHOxEcAeuq4En4lCMBIAbne6Ph00cYbz2lEw%2BRFrARoJ%2FxsZwyGaMiFsSBsiaBwQ%7Ctkp%3ABk9SR5jJzqnpYw
#4
Cars For Sale or Wanted / 1970 Cuda 340, auto, #'s match...
Last post by LoStHeMi - Today at 02:53:52 PM #5
Cars For Sale or Wanted / Re: Interesting T/A on eBay
Last post by cuda hunter - Today at 02:09:51 PM88K did not meet the reserve.
#6
Cars For Sale or Wanted / Re: Interesting T/A on eBay
Last post by cuda hunter - Today at 02:09:31 PMItem description from the seller
Up for sale is my 1970 Dodge Challenger TA 340 6 Pack that has been completely restored back to all factory specs.
I have all the receipts from the restoration along with over 1200 hundred pictures of each stage the car went through.
This was over a 5-year restoration from start to finish.
I have a lot of paperwork that comes with the car. The Challenger TA 340 6 Pack started life March 1970 and came out of the Hamtramck Assembly Plant located in Detroit, Mi. It was shipped to St Clair Dodge Inc. Located in Pittsburg Pennsylvania. The window sticker comes with the car and listed all the options that came on it for that year.
This is also a very rare car because it is a V02 car which is a 2 - tone car meaning the top is painted one color and the body another. In 1970 there was only about 4-5 cars that were built with the VO2 code per Expert Galen Govier. This car is the ONLY FC7, EW1, car that was made in 1970 making it very rare. There are currently 871 TA'S on file, of those only two are known to be 2- tone cars. This car is the only one currently known in the FC7, Plum Crazy, & EW 1, White Top. The other VO-2 known car is Hemi Orange with a Black Top.
One last thing about this car is that the bottom looks as good as the top from front to rear!!!!
If you have any questions, please email me and I will respond back to you.
Up for sale is my 1970 Dodge Challenger TA 340 6 Pack that has been completely restored back to all factory specs.
I have all the receipts from the restoration along with over 1200 hundred pictures of each stage the car went through.
This was over a 5-year restoration from start to finish.
I have a lot of paperwork that comes with the car. The Challenger TA 340 6 Pack started life March 1970 and came out of the Hamtramck Assembly Plant located in Detroit, Mi. It was shipped to St Clair Dodge Inc. Located in Pittsburg Pennsylvania. The window sticker comes with the car and listed all the options that came on it for that year.
This is also a very rare car because it is a V02 car which is a 2 - tone car meaning the top is painted one color and the body another. In 1970 there was only about 4-5 cars that were built with the VO2 code per Expert Galen Govier. This car is the ONLY FC7, EW1, car that was made in 1970 making it very rare. There are currently 871 TA'S on file, of those only two are known to be 2- tone cars. This car is the only one currently known in the FC7, Plum Crazy, & EW 1, White Top. The other VO-2 known car is Hemi Orange with a Black Top.
One last thing about this car is that the bottom looks as good as the top from front to rear!!!!
If you have any questions, please email me and I will respond back to you.
#7
Looking for pair of fender scoops, complete if possible. I will use reproduction insert if needed otherwise.
Please price with shipping to 91723
Please price with shipping to 91723
#8
T
Cars For Sale or Wanted / Re: 1970 AAR Cuda, B5, auto, ...
Last post by TX9AAR - Today at 12:14:51 PM@Gary AAR sorry got you confused with some one else
#9
High bid was $88,000 I thought it would get bid higher than that
#10
Selling this factory original 70 Cuda Road Lamp Wiring.
This is the wiring harness that goes from the firewall to the two Road Lamp housing connectors.
It is from a 70 AAR Cuda that I parted out 40 years ago.
I'm seeing a date code of 69 281
Selling the part for $35 + mailing cost.
Payments by PayPal "friends and family" or by a Postal Money Order.
This is the wiring harness that goes from the firewall to the two Road Lamp housing connectors.
It is from a 70 AAR Cuda that I parted out 40 years ago.
I'm seeing a date code of 69 281
Selling the part for $35 + mailing cost.
Payments by PayPal "friends and family" or by a Postal Money Order.