Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Daveh on March 15, 2022, 10:42:13 AM

Title: Challenger Convertible Belt Molding Hardware UPDATE
Post by: Daveh on March 15, 2022, 10:42:13 AM
Hi Guys,

Does anyone know where I can get the Challenger convertible belt molding hardware?  It's the three pieces of trim that go around the back of the car.  It's will hold the boot on.  Thanks
Title: Re: Challenger Convertible Belt Molding Hardware
Post by: rjhjr on March 15, 2022, 10:52:54 AM
Classic Industries
https://www.classicindustries.com/product/all-years/dodge/challenger/parts/me12228.html
AMK Products has the correct screws.
Title: Re: Challenger Convertible Belt Molding Hardware
Post by: Daveh on March 15, 2022, 11:03:42 AM
Thanks I do have a few of those but not a complete set.  I appreciate it. 
Title: Re: Challenger Convertible Belt Molding Hardware
Post by: Daveh on March 15, 2022, 12:16:08 PM
Another question.  I guess I thought the trim would attach differently because of the holes in the body where the trim goes.

Can someone give me a picture or tell me how that trim is attached?  Thanks.
Title: Re: Challenger Convertible Belt Molding Hardware UPDATE
Post by: anlauto on March 15, 2022, 12:24:46 PM
The J shape side pieces screw on with six screws per side and the long center piece just clips on  :alan2cents:
Text only | Text with Images