Want to buy a pair of 70-72 e-body disc spindles to my -70 challenger. Anyone here has it for sale? Please contact me.
https://www.doctordiff.com/reproduction-disc-brake-knuckles.html
Quote from: rftroy on September 09, 2022, 12:53:14 AM
https://www.doctordiff.com/reproduction-disc-brake-knuckles.html
They are not 70-72 spindles, already talked to him. No one reproduces the 70-72 spindles unfortunely.. i need to find a pair of orginals.
Do you just want the spindles, or do you need the backing plates and caliper mounts also?
Quote from: 68bee on September 09, 2022, 07:49:32 AM
Do you just want the spindles, or do you need the backing plates and caliper mounts also?
I just need the spindles :)
Are these what you are looking for? These came off a 1970 RT. Make me a reasonable offer and the shipping is on you. Where to? and I will check on shipping, next week, via USPS.
Quote from: johnr on September 10, 2022, 12:24:59 PM
Are these what you are looking for? These came off a 1970 RT. Make me a reasonable offer and the shipping is on you. Where to? and I will check on shipping, next week, via USPS.
Yes thats correct, i send you a mail.
Quote from: johnr on September 10, 2022, 12:24:59 PM
Are these what you are looking for? These came off a 1970 RT. Make me a reasonable offer and the shipping is on you. Where to? and I will check on shipping, next week, via USPS.
You may need to PM him as his replies may be limited to having less than 10 posts.
Quote from: johnr on September 10, 2022, 12:24:59 PM
Are these what you are looking for? These came off a 1970 RT. Make me a reasonable offer and the shipping is on you. Where to? and I will check on shipping, next week, via USPS.
Do you have Facebook? Its essier to talk there! I tried send you a message here but dont know if it got sent ..
You do know that there were 2 different calipers available that year. One of them is unobtainium.
I am assuming this is for an OEM restoration otherwise you would want the improved 73 and up disc brakes.
Quote from: MoparLeo on September 10, 2022, 01:11:13 PM
You do know that there were 2 different calipers available that year. One of them is unobtainium.
I am assuming this is for an OEM restoration otherwise you would want the improved 73 and up disc brakes.
I know. But iam swaping from my rightstuff brake kit to willwood brakes, and i ordered to my 70 challenger, and willwood have the smaller bearing then. And i noticed that rightstuff uses the 73 and up spindle that have bigger bearing. So the only way to fit my willwood brake kit is to mount the correct 70-72 spindle. I should have ordered to a 73 modell but that is to late now.
Why not sell what you got so you can get the upgraded parts ? Your parts will have less value if you use them.
Does the Wilwood kit require a disc brake spindle or a drum brake spindle ? I know some of the aftermarket kits use a drum brake spindle... :huh:
Quote from: anlauto on September 10, 2022, 01:29:38 PM
Does the Wilwood kit require a disc brake spindle or a drum brake spindle ? I know some of the aftermarket kits use a drum brake spindle... :huh:
You can get both , either drum brake spindle or disc spindle. My kit is for disc spindles but for the 70-72 modell. And i have the 73 spindle.. didnt check that close enough before ordering.
Quote from: MoparLeo on September 10, 2022, 01:28:59 PM
Why not sell what you got so you can get the upgraded parts ? Your parts will have less value if you use them.
Its not so essy to just sell and order new when you live in Sweden. The shipment cost more then the parts and then you Will have to Wait months before it arrives. So buying the correct spindles is the easy way for me. Its not bad stuff just because it have smaller bearing.
I have a lot of European customers. Just thought you may sell more locally to you. Shipping to someone else in Europe should be cheaper than shipping to America. Doesn't hurt to try. The Mopar community works together well.
@Rasmusvestlin i had the same exact problem with my wildwood setup 3 years ago. i can't exactly remember what i did, but i kept the newer style spindle. i wanna say i changed the bearings and maybe changed/ordered something else from Wildwood to make it work. it worked out just fine. I just remember looking a the diagrams to see how I could fix it. i just can't remember the fine detail.
Sent from my Pixel 6 Pro using Tapatalk