My question is My rear seat 3 pt seat belts on my 74 Cuda mount inside the side moulding do they mount directly in there or is another retractor also inside the moulding any help would be great
There should be another retractor in there. Otherwise the belt wouldn't fit against your body or if you were really large not fit around you.
Quote from: 72 Challenger on January 30, 2018, 08:27:08 AM
There should be another retractor in there. Otherwise the belt wouldn't fit against your body or if you were really large not fit around you.
:iagree: There is a retractor in there, and a molding around the hole. My car has them installed when I bought it.
ok i was told different things so it has a retractor under the mouldings would anyone know were the seat belts can be purchased
Quote from: blowin74 on January 30, 2018, 11:19:04 AM
ok i was told different things so it has a retractor under the mouldings would anyone know were the seat belts can be purchased
To my knowledge they are not reproduced ? I have my old ones if your stuck but they are not mint condition either.
hi Brad thanks i have looked now on and off for 3 years what color do you have ??and on a condition scale of 1-10 what would you say. I have probaly 10 emails out with no one even the custom makers not getting back I just need them to mostly plug the holes more than anything its one on my last parts i need
Quote from: blowin74 on January 30, 2018, 11:55:29 AM
hi Brad thanks i have looked now on and off for 3 years what color do you have ??and on a condition scale of 1-10 what would you say. I have probaly 10 emails out with no one even the custom makers not getting back I just need them to mostly plug the holes more than anything its one on my last parts i need
They are black. I dug them out and took a couple pictures? Not frayed but a little bleached from the sun. Maybe they could be redyed to look new? I took a picture to show the slight rust and cracked sheath? The one buckle is missing the decorative metal insert.
what do you want for them iam in canada also
Quote from: blowin74 on January 30, 2018, 03:22:18 PM
what do you want for them iam in canada also
I know you don't know him , but we used to have a Member over on CC.com named Alan Lemon from Alabama that is a very generous person. He would often give parts away to people that needed them, myself included. Others have been inspired by this so maybe it will rub off on this site as well so send me your name /address and you just pay the shipping. Pay it forward when you get the chance! ;)
Or if you live close by swing by and pick them up?
very generous and i thank you iam in SC doing shows and stuff until mid april i will contact you if thats ok instead of paying high shipping to SC from ontario i live in NL
I was looking for a set for my car and my research also suggests no one reproduces the 72 and up style seat belts. I am wishing I asked on the forum first! I ended up paying more than they were worth but without them the car wouldn't pass a safety inspection and I couldn't drive it.
Hi Brad I have two sets of friends in ontario who are coming down here in a month or so I will probaly have them pick it up or have you mail to them and I will take care of any costs to you give me a day or so for them to read emails
Quote from: blowin74 on January 31, 2018, 05:10:10 AM
Hi Brad I have two sets of friends in ontario who are coming down here in a month or so I will probaly have them pick it up or have you mail to them and I will take care of any costs to you give me a day or so for them to read emails
No worries , they are yours .
Just in case others run into this down the road, this is always an option.
http://www.seatbeltstore.com/category-s/2.htm
I went with these for my car....
https://www.wescoperformance.com/long-sash-seat-belt-starburst.html
so you mounted them inside the moulding or just into the floor behind the seat
Quote from: blowin74 on January 31, 2018, 09:26:47 AM
so you mounted them inside the moulding or just into the floor behind the seat
I mounted them on the floor behind the seat. At the same time I installed new rear panels and door panels without the cut outs. Sold my old panels on Kijji in a day.
Hey Brad would you ship them to me down here my email is robertaherr@hotmail.com email and lets get this done somehow I will cover any costs
Quote from: blowin74 on February 01, 2018, 10:04:37 AM
Hey Brad would you ship them to me down here my email is robertaherr@hotmail.com email and lets get this done somehow I will cover any costs
email sent....
Quote from: Brads70 on January 30, 2018, 05:48:22 PM
Quote from: blowin74 on January 30, 2018, 03:22:18 PM
what do you want for them iam in canada also
I know you don't know him , but we used to have a Member over on CC.com named Alan Lemon from Alabama that is a very generous person. He would often give parts away to people that needed them, myself included. Others have been inspired by this so maybe it will rub off on this site as well so send me your name /address and you just pay the shipping. Pay it forward when you get the chance! ;)
Or if you live close by swing by and pick them up?
You sir are one heck of a guy!
@Brads70 (https://forum.e-bodies.org/mlist/brads70_12)
:iagree: