This Stamp Artwork is free to any E-Bodies.org members that want to make there own. I made these original files from scratch because I wasn't happy with how accurate the others being sold online. You can take this artwork and order your own stamps. I buy my stamps from this place:
http://www.rubberstamps.net/Art-Stamps.aspx
Just send me a PM with what you need and your email address. I'll email you the artwork files that are ready to send off to the stamp company. It's up to you to figure out what stamps numbers that are correct for your E-Body, but I'm sure if you need help, someone here can help.
Also, if you want a special date on your Voltage Regulator, just let me know and I can make it anything you need. I buy the New Mopar Voltage Regulators from Dave at Roseville and they all come with a sticker. Take the sticker off and stamp it with white ink. The only difference then is the small raise circle that NOS have, but it looks nearly perfect and saves you about $100. And you get the perfect custom date that matches your E-Body.
:idea: Maybe what I'll do is add all this stuff to a page on our site so anyone can download what they need. :thinking: I'll work on that!
Quote from: Cuda Cody on January 17, 2017, 11:02:37 PM
:idea: Maybe what I'll do is add all this stuff to a page on our site so anyone can download what they need. :thinking: I'll work on that!
That sounds perfect!
Started adding them to our site. The Voltage Regulator Stamps are up and ready to download. Tried to cover a bunch dates, but if there's one you have to have just ask. I'll do my best. :handshake:
http://www.e-bodies.org/resources/mopar-stamps-stencils-paint-ink-part-numbers/ (http://www.e-bodies.org/resources/mopar-stamps-stencils-paint-ink-part-numbers/)
I'll pay you extra to have the axles stamps made and mailed to me :bigmoney:
You don't have to pay me extra. Just cover the cost of the stamps and postage. The artwork is free. :twothumbsup:
Give me a bit to get them all uploaded and then let me know what ones you want.
Quote from: anlauto on January 18, 2017, 04:34:03 PM
I'll pay you extra to have the axles stamps made and mailed to me :bigmoney:
Last time you posted the axle numbers, I took them to a local Staples and ended up paying them a lot of money to have them totally screw up the size, that's why I need someone to take care of it for me and have the correct size made. I don't mind paying for the correct stuff.
Consider it done. I'll get the rest of them uploaded then we'll figure out what ones you want. Super Easy :bigthumb:
It just keeps coming, can't get any better than the new site!! Thanks Cody. :woohoo: :worship:
Quote from: anlauto on January 18, 2017, 04:34:03 PM
I'll pay you extra to have the axles stamps made and mailed to me :bigmoney:
Me Too. :yes:
Quote from: anlauto on February 07, 2017, 10:58:56 AM
Now how about the red/white dana axle sticker...How is that achieved ?
Does ECS sell those?
Quote from: farmboy70 on February 07, 2017, 11:08:36 AM
Quote from: anlauto on January 18, 2017, 04:34:03 PM
I'll pay you extra to have the axles stamps made and mailed to me :bigmoney:
Me Too. :yes:
It was actually pretty easy to do it myself using the company Cody suggested. There is full instructions on this web site how to order.
Quote from: cataclysm80 on February 07, 2017, 11:13:37 AM
Quote from: anlauto on February 07, 2017, 10:58:56 AM
Now how about the red/white dana axle sticker...How is that achieved ?
Does ECS sell those?
I know Roger Gibson/Frank Badleson sells them...probably the guys you mentioned too....
I was hoping to just find out the font & size and I'll just print them from my computer :D
Glad you were able to get them ordered. :clapping: The size of the axle stamps was taken from a few places. I used .767 to .779 for the size (depending on the letter). The funny part of it is I thought they were a little large because the factory stamps might have a little over bleed from the worker pushing hard! :rofl: I took the measurements myself from originals, but that doesn't mean there wasn't more then one sized used over the year. Let me know what you think of them after you use them. I think they work really good. :dunno: And any bigger and I'm not sure they would fit on the 3rd member webbing. :notsure: Maybe that's how the factory decided on the size?
I think the originals on the housing tubes are yellow and the 8 3/4 chunk is white? But I did all mine is yellow by mistake. :sorry:
Quote from: anlauto on February 07, 2017, 10:58:56 AM
Okay....Today I received the 18 different stamps that I ordered, they look good, the axle stamp numbers look a little small but I will get a better idea once I actually put them on the rear end I guess.
That's @Cuda Cody (http://forum.e-bodies.org/index.php?action=profile;u=1) for all your hard work.....I would guess the rubber stamp company would like to thank you as well for all the extra business :1place:
Now how about the red/white dana axle sticker...How is that achieved ?
That picture with the tape measure is what I was looking for...These ones I got measure 3/4" which looks to be exact.
The ones I bought locally were almost twice the size :pullinghair:
I've seen pale pink on the center chunk.
I made that artwork too, but I didn't have an original to match so it's not correct yet. That's why it's not on the website for download at this time. If someone can get me an original or very detailed photos and measurement I would be happy to make the artwork for everyone.
The ones I do for my cars are stickers. :foul: Not paper, but they look good and last forever!
Quote from: anlauto on February 07, 2017, 10:58:56 AM
Now how about the red/white dana axle sticker...How is that achieved ?
Where would I find the part number I need for a 1970 B Body 3:54 with 10" brakes ends in "083"
NEVERMIND...I just found it 3432083
Cody, any thought on adding more stamps to the stamp in the resources group?
I'm looking for the fan part number stamp(s) and the Made in Canada stamp (actually there may be 2 sizes to that)