I opened up the a833 I bought and the gears have some putting on them. It looks like the hard surfacing is coming off alittle in spots, like little pits. I'm assuming I need a new gear set?
Once it starts , it don't stop. But depending how bad it is, you can sometime nurse it for a while :wrenching:
Its just starting, but I have the transmission apart now so I'll find a set of gears.
You could put in Passons 18 spline OD 4 spd set
Sounds expensive haha
I couldn't find it on the Passon website. :alan2cents:
Was curious how much $$ that would be.
It used to be $2k US I believe, not sure he still carries them.
Yikes! I think I know why he doesn't carry them anymore....
2K for 4 gears?
It seems to me that's gears, synchros, bearings and I'm going by memory. It actually was a fair deal I think.
it is Not just 4 gears ,
you have input shaft & gear , Mainshaft is different also , complete countershaft cluster gear with the pin it rides on & & the 3 gears on the mainshaft + 2 new syncros & 4 syncro rings , brgs too
basically new everything inside the case