E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Your Restoration project (ROSEVILLE MOPARTS) => Topic started by: roguedc72 on October 23, 2017, 05:13:07 PM

Title: wiring
Post by: roguedc72 on October 23, 2017, 05:13:07 PM
Hello fellow mopar weirdos, I'm finally putting my 72 340 challenger back together and have a couple of issues, the trunk floor and extensions were replaced a while back and the body shop never drilled the holes where the fuel sender unit wire goes through,it has sender unit on the left side towards the front, also the license plate wire hole, anybody with a 72 that can tell me where or better yet a couple pics would hugely appreciated,thanks in advance.
Title: Re: wiring
Post by: Roadman on October 23, 2017, 05:17:14 PM
            Hey, welcome to the party @roguedc72 (https://forum.e-bodies.org/mlist/roguedc72_1043)     :welcome: Stay tuned.     :rebelflag"
Title: Re: wiring
Post by: Chryco Psycho on October 23, 2017, 06:26:24 PM
Welcome to the Site  :bigthumb:
The Fuel sender wire drops through a small 1" hole right above the sending unit in the tank , one of the members will have a picture , sorry I do not .
Title: Re: wiring
Post by: Cuda Cody on October 23, 2017, 06:49:07 PM
@roguedc72 (https://forum.e-bodies.org/mlist/roguedc72_1043)   It's not labelled in the photo in this link, but you can see it across from the filler hole in the trunk.

https://forum.e-bodies.org/reference-material/18/e-body-hole-locations-firewall-door-interior-ect/303/
Title: Re: wiring
Post by: 303 Mopar on October 24, 2017, 06:35:05 AM
Quote from: roguedc72 on October 23, 2017, 05:13:07 PM
the holes where the fuel sender unit wire goes through,it has sender unit on the left side towards the front

Here is the fuel sender location on my '70, not sure if it changed on the '72 but hope this helps.
Title: Re: wiring
Post by: roguedc72 on October 24, 2017, 05:16:10 PM
thanks, I'm going to hang to that post, lots of useful info