E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: Odin on December 31, 2019, 07:02:09 PM

Title: Solved - Windshield Wiper Switch and Motor not working correctly
Post by: Odin on December 31, 2019, 07:02:09 PM
restoring a 71 Challenger including all new wiring harnesses.  It's been about a year since I last used the wipers, but I know they worked at that time.  Car has been at body shop and mechanic since last February.  I just got the car to a place where I can check electrical stuff.  I have a 3-speed motor and what looks like a variable speed switch.

Problem: motor only turns when switch is in far left counterclockwise position.  Motor stops in all other positions.

I just pulled the dash apart to look at the switches and wiring.  Right away I see one terminal on the switch which has no wire connected to it.  Also, the two-speed harness was connected to the three speed motor while it was at the body shop months ago.  It looks like a hack job.  Please help me figure out what is wrong and what needs to be repaired or replaced.
Title: Re: Windshield Wiper Switch and Motor not working correctly
Post by: edison1970 on December 31, 2019, 09:09:54 PM
I might be wrong but that doesn't look like a 3 speed switch. I have 2 of them and the one you have looks completely different.
Title: Re: Windshield Wiper Switch and Motor not working correctly
Post by: fc7cuda on January 01, 2020, 06:13:58 AM
#2770380 is correct for 70 variable speed wiper switch.  :alan2cents:

You might try testing the switch and motor, use the service manual and this video too.

https://www.youtube.com/watch?v=UmP3SYjdQSQ

Good luck  :fingerscrossed:

Title: Re: Windshield Wiper Switch and Motor not working correctly
Post by: 750-h2 on January 01, 2020, 06:53:16 AM
Also make sure that the switch is properly grounded.
Title: Re: Windshield Wiper Switch and Motor not working correctly
Post by: Odin on January 06, 2020, 11:51:46 PM
I sent the 3-speed motor to Bruce Somer. He tested it and quickly found out the guy who installed the new wiring harness did it wrong. The motor works fine. Bruce will clean it up and replace the wiring for me. Great guy. I was going to send the switches to get restored but don't think I will now
Title: Re: Solved - Windshield Wiper Switch and Motor not working correctly
Post by: Dakota on January 07, 2020, 02:35:46 AM
Glad you got your issue fixed.  I sent my wiper motor to Bruce after I rebuilt it but couldn't get it to run on a bench test.   He quickly found a loose wire in the new harness.   Good guy. 
Title: Re: Solved - Windshield Wiper Switch and Motor not working correctly
Post by: HEMICUDA on January 07, 2020, 02:56:04 AM
You guys quit sending Bruce more work, he's suppose to be working on another wiper motor for the pink AAR I'm getting ready to put together. :cheers:
Title: Re: Solved - Windshield Wiper Switch and Motor not working correctly
Post by: JS29 on January 07, 2020, 06:44:57 AM
Bruce is the man, he found a correct date code wiper motor, rebuilt it, and helped me figure out were the untrained chimp's that through my car together changed wires in the plug.   :headbang: