Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Tools and Equipment => Topic started by: plymouthbelvy on July 04, 2020, 05:45:02 PM

Title: Mopar 4 Speed Shifter Alignment Tool
Post by: plymouthbelvy on July 04, 2020, 05:45:02 PM
Looking for this shifter alignment tool.Thanks.
Title: Re: Mopar 4 Speed Shifter Alignment Tool
Post by: RUNCHARGER on July 04, 2020, 06:51:02 PM
Not sure if you're aware but an allen wrench of the correct size works great as well. Or a drill bit if you're setting it up outside of the car.
Title: Re: Mopar 4 Speed Shifter Alignment Tool
Post by: Rich G. on July 04, 2020, 07:24:56 PM
Boy that's overkill . Hurst just had a round pin with a 90degree bend. Drill bit works too .
Title: Re: Mopar 4 Speed Shifter Alignment Tool
Post by: plymouthbelvy on July 04, 2020, 08:51:18 PM
What if the reverse arm has no hole to go through? Mine is a factory mopar shifter and it has no hole in reverse arm lever to put anything through all three arms. I cant use the hurst tool or anything else to go through it.
Title: Re: Mopar 4 Speed Shifter Alignment Tool
Post by: plymouthbelvy on July 04, 2020, 09:13:13 PM
What if reverse has no hole to go through??
Text only | Text with Images