E-Bodies.org Cuda Challenger Forum

Technical Shop => VIN, Fender Tag, Build Sheet & Date Codes => Topic started by: Cuda Cody on April 28, 2017, 10:48:54 AM

Title: E-Body Build Sheet or Fender Tag Decoder Help
Post by: Cuda Cody on April 28, 2017, 10:48:54 AM
Need help using the Build Sheet or Fender tag decoders?   :help:  No worries at all, we're here to make sure you get all the help you need.  Just post any questions, problems or comments about using the E-Body Build Sheet or Fender Tag Decoders and we'll be happy to assist you in decoding it.   It helps if you can attach a photo of your Build Sheet, but not necessary.

If you get an "Unknown" in the results, it's important you post a photo of that area of your build sheet or Fender Tag so we can offer the most help.


All decoders:
http://www.e-bodies.org/decoders/
Title: Re: E-Body Build Sheet or Fender Tag Decoder Help
Post by: W1AAR on May 09, 2023, 11:53:21 AM
Hi:  I have noticed that for Transam cars the K member has a part number of 3583052 and therefore, 52 on the coin.  But when i check the cars, I have also noticed some came with a 72 Coin which I can't find in the parts book>  Do you know where this 72 K member would come from?
Thanks
Kent