Hi Guys, chasing a drivers quarter glass, tinted and preferably with the alloy bracket and seal strip still attached suit a 71-74 Cuda or Challenger please, ship to Washington State, may have a clear 70 mod drivers quarter glass to trade
All - Crash520 was/is searching on behalf because he and I were installing the glass in my Cuda. I am located in WA state (north of Olympia).
You know that Cuda and Challenger 1/4 glass are totally different and the stainless steel weather-strip channel is different from 1970 to all the rest 71-74. :alan2cents: Be careful what you buy. :bigthumb:
Yes I have read the 73 FSM (which is incorrect with regards to components); Crash520 was slightly mistaken when he wrote "Challenger" in the original posting.
So, to be clear I need a tinted LH quarter glass for a Cuda/Barracuda. I need the entire assembly and not just the glass as I have a complete assembly for a 70 Cuda (which as stated is different).
I have the green side glass for a 72 barracuda but the hardware is removed.I think I have everything,I'll have to look.I have a 70 barracuda and did use pieces from a diff year.The glass is the same but the hardware is a little different,I made it work.
That would be awesome if you have all the parts. I am fairly certain that putting the glass into the bottom metal is a pain but its better than no window.
I will look in the morning and see what i have
thanks
I only have all the glass and I would rather get rid of it as a complete set,I know that is not what you wanted to hear.I am in Buffalo NY,so it would cost a lot.You can buy only the glass you need,there are places that sell one piece.Sorry the brackets were all broke.
No worries, I appreciate you looking.
Reproduction is available at Roseville . . . :twothumbsup:
Just the glass I believe, that said I found an entire assembly at Wildcat Salvage in OR; they have a lot of stuff.