Hey guys! :wave:
Some of you may remember me from C-C, I've got a 1972 Challenger with a 318/904 and a whole mess of suspension and handling upgrades. It was my daily driver for about 70k miles and close to 7 years. I stopped posting over there and never really started posting over here, the website launch and all that kind of happened at the same time I was parking my Challenger and using my '74 Duster/Demon clone as my primary mode of transportation. So I've been lurking around here for awhile but spending all my forum time over an at A-body forum.
Anyway, I'm trying to get back into working on my Challenger again more, so I thought I would check in, start a restoration thread (it's gonna be a doozy, there's a whole lot of panel replacement going on), maybe sell off some of my extra/leftover stock parts from my Challenger from the changes of direction and upgrades etc.
I know you guys like pictures, so I'll post up an old one of my Challenger for now (back when it still looked good from 20 ft away) and my current '74 Duster ride.
Lots of folks showing up here on this forum today!
Glad you made it over. Of course we remember you from that other site.
Do you keep the same name over on fabo?
Welcome!
:welcome: from Winnipeg, Manitoba, Canada :canada:
You have found your E-Body home, the best E-Body site in the world...
Good luck redoing your Challenger.....
:wave: Welcome from Ontario :canada:
Welcome from Colorado
Well...it took you long enough, but we're glad you came.... :cheers:
You'll find this is the best E Body web site in the world.....don't believe me ? Check out the main site, you'll never find more E Body info anywhere on the net....
Welcome [back] from Panama :panama: :wave:
Welcome from Sylmar, CA :welcome:
Thanks guys!
Yeah I've been kinda just lurking around for awhile, it seems like a great forum. Just didn't have much to post because I wasn't doing a ton of work on my Challenger. Well, I did a bunch and then kinda stopped while I decided on a plan of action after finding some really gnarly issues. I'll leave all that to my restoration thread.
Quote from: cuda hunter on April 20, 2018, 11:51:28 AM
Lots of folks showing up here on this forum today!
Glad you made it over. Of course we remember you from that other site.
Do you keep the same name over on fabo?
Welcome!
Yeah for simplicity I have the same username on pretty much all of the boards, FABO, FEBO, FBBO, Moparts, even the Road Runner Nest. Protouring Mopar is the only place I have a different handle but that place is pretty much dead. I pretty much only post over at FABO though. And here now of course. :D
:welcome:
Welcome From Atlanta!
Welcome to the site from Buffalo, NY :wave: I remember reading a bunch of your posts on tire selection and fitment on the "other" site. Glad to have you here!
Welcome back, great to see you again!
Welcome to the site. I've alway enjoyed your posts on the other sites. You've always have had a lot of good "stock based" suspension feedback.
Wes
Right on! Good to see you here.
Welcome!
:cheers:
Glad your back and working on that beautiful Challenger!
Welcome from B.C. Canada.
Hey Bother ... :wave:
good ta see ya around
As a fellow CC.com alumni, welcome to the site and good luck with the reno! :wave:
Welcome and a HUGE THANKS for all your suspension help and hooking me up with the FAVORITE accessory on my car that I will leave un-named. :slapme5: You have been a great help to me and I hope you find this site to be a great inspiration for your challenger. Nice Duster by the way.
Welcome. I remember you from C-C. Nice wheels on the Duster.
Cya at De Anza. :wave:
:welcome: to the site
:welcome: From Krazyfornia
I too have read and learned from your posts, good to see you here. :bigthumb: Thinking of doing an HEI conversion and FABO does have some good info. Good luck on your car.
Welcome from Michigan! Glad you signed up here! :wave:
Quote from: 303 Mopar on April 20, 2018, 07:14:43 PM
Glad your back and working on that beautiful Challenger!
Man I wish it was actually beautiful. The power of a 20ft photo is all that is. I'll get my build thread going here in the next few days, but I think you'll see my Challenger is anything but beautiful pretty quick. Bondo bucket more like. So far I've already replaced partial floors, a good chunk of the firewall, and most of both of the rear frame rails. I still have both quarters and a good lot of the roof structure in the window arches to replace and repair. It's a rusty mess that one.
Quote from: Topcat on April 21, 2018, 10:30:14 PM
Cya at De Anza. :wave:
Thanks! But probably not. I'm scheduled to work that day. I may try to figure out a way to take off though, I'd like to get rid of some of my take offs and direction change leftovers that I can't really ship. Couple of hoods, fenders, and a complete A/C box to name a few.
Welcome to over here :D :welcome:
Post as you can - life can get overwhelming at times :)
Welcome blu!
Look forward to following the progress on your Challenger.