Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: bc3j on January 02, 2020, 10:00:03 AM

Title: Back up light bezel
Post by: bc3j on January 02, 2020, 10:00:03 AM
I have new "DODGE" letters for the back up lens. Bolts are all out and the bezel can by wiggled but not able to be pulled out. I suspect it's held in place by the old gasket. Is there a procedure or method to loosen the old gasket? I don't want to break that bezel or damage anything else.
Title: Re: Back up light bezel
Post by: anlauto on January 02, 2020, 10:06:12 AM
The tail light bezels hold it in place as well, they will need to be removed too, if you haven't already..
Title: Re: Back up light bezel
Post by: bc3j on January 02, 2020, 10:30:31 AM
Did not know that. Thanks
Title: Re: Back up light bezel
Post by: 7E-Bodies on January 02, 2020, 10:32:01 AM
@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) beat me to it. I just finished a test fit on my 70 tail lights after working on the tail panel and this is true.
Title: Re: Back up light bezel
Post by: bc3j on January 02, 2020, 11:45:01 AM
That's why I'm here!  Thx again.
Title: Re: Back up light bezel
Post by: 1 Wild R/T on January 02, 2020, 02:45:04 PM
bc3j every time I see your post your photo makes me hesitate... Looks an aweful lots like an old photo of my Challenger....
Text only | Text with Images