Print Page - Tail Light housing

Title: Tail Light housing
Post by: scott11224 on September 09, 2018, 11:16:21 AM

Has anyone found a suitable paint to simulate the dark yellow zinc dichromate color for a 70 cuda tail light housing?

Title: Re: Tail Light housing
Post by: PLUM72 on September 09, 2018, 11:48:52 AM

I have not used this stuff before, but Eastwood has something that might work for you
https://www.eastwood.com/eastwood-golden-cad-complete-kit.html

Title: Re: Tail Light housing
Post by: Cuda Cody on September 09, 2018, 12:03:12 PM

:iagree: That's about as good as it gets for rattle can. If you want to do the real thing you can get the mix from Caswell Plating in NY.

Title: Re: Tail Light housing
Post by: anlauto on September 09, 2018, 01:06:23 PM

There are several people that re-plate these things....I believe Scott Smith does them the same as a Holley carburetor, or if you don't like that look, Stephan Fournier does them with his on concoction ....

I've used Stephan's several times !

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: scott11224 on September 09, 2018, 11:16:21 AM