Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Wheels, Tires, Brakes, Suspension & Steering => Topic started by: Rutro on July 26, 2017, 08:25:47 AM

Title: What does the correct lug nut wrench look like?
Post by: Rutro on July 26, 2017, 08:25:47 AM
OK, what does the correct lug nut wrench (tire iron) look like for 1970?
I have 4 different ones. One has a curled lip on the flattened end.
Thanks, Mark
Title: Re: What does the correct lug nut wrench look like?
Post by: Cuda Cody on July 26, 2017, 08:32:58 AM
#1 Original 1970 AAR

#2 Original 1970 T/A
Title: Re: What does the correct lug nut wrench look like?
Post by: Rutro on July 26, 2017, 01:28:55 PM
Cody, these are the 4 I have. Do any of these look correct. I'm not really sure why I ended up with this many.
The one on the left has the rolled edge on the flattened end and it fits 13/16 nuts.
The others fit 3/4 nuts.
The one on the right is in pretty bad condition.
I'm not even sure if they are for Mopar.
Title: Re: What does the correct lug nut wrench look like?
Post by: Cuda Cody on July 26, 2017, 04:25:18 PM
E-Bodies are about 3" from the bend to the end of the lug wrench.  Overall straight area is about 15" to 16" long.  I would say the 3rd on down in your photo looks the closest.
Text only | Text with Images