E-Bodies.org Cuda Challenger Forum

Technical Shop => Tools and Equipment => Topic started by: 73440 on January 01, 2018, 01:23:27 PM

Title: Worklight
Post by: 73440 on January 01, 2018, 01:23:27 PM
Bought a new Mantis worklight from Napa,.
Works well, nice and small, has two lights , one on the end and the other on the flat side, pivoting stand with magnet on the end of the stand, pocket clip.
$20 , was on sale.
Title: Re: Worklight
Post by: 71-440 on January 20, 2018, 05:43:35 PM
That's a handy little lite.  :bigthumb:
Title: Re: Worklight
Post by: 73440 on January 20, 2018, 06:27:11 PM
Other than my Streamlight ProTac HL headlamp , https://www.streamlight.com/en/products/detail/index/protac-hl-headlamp  ,I reach for the Mantis.
I have a lot of sizes of Maglites and like them also.
Title: Re: Worklight
Post by: Jim AAR on January 20, 2018, 07:23:50 PM
I have these headlights:

http://www.energizer.ca/lighting/headlights#vhdlh

150 Lumen LED`s, (Promo 2-pak) $29.95 Cdn @ Home Depot, works great
Title: Re: Worklight
Post by: 73440 on January 20, 2018, 07:35:16 PM
 The headlamp choices have sure changed over the years these are the ones I've had for about 30 years .
Title: Re: Worklight
Post by: Shane Kelley on March 28, 2018, 10:05:27 AM
If I plan on spending some time under the hood I use one of these LED shop lights hanging under the hood.  Works great and cost $20 at Menards. I use it under the car also laying on it's back. Really lights up things nice.
Title: Re: Worklight
Post by: Cudakiller70 on March 28, 2018, 10:09:00 AM
 :iagree: did this it's the best light (6500k daylight bulbs) I've used so far :bradsthumb: