Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Engine, Transmission & Rear End => Topic started by: Ricomondo on August 07, 2020, 03:00:29 PM

Title: Difference in Dana drive shaft vs 8.75 Challenger drive shaft
Post by: Ricomondo on August 07, 2020, 03:00:29 PM
Curious what the difference is between the two? Is one longer?

4spd Challenger with Dana vs 8.75 in a Challenger.

TIA
Title: Re: Difference in Dana drive shaft vs 8.75 Challenger drive shaft
Post by: rftroy on August 07, 2020, 04:56:11 PM
44.60" vs 45.60" from CL of u-joint bearing bores.
Dana shaft is 1" shorter because Dana is bigger and pinion yoke sits about 1" farther forward.
Robert
Title: Re: Difference in Dana drive shaft vs 8.75 Challenger drive shaft
Post by: Ricomondo on August 08, 2020, 12:02:29 PM
@rftroy (https://forum.e-bodies.org/mlist/rftroy_377) thank you! Much appreciated.
Text only | Text with Images