E-Bodies.org Cuda Challenger Forum
- Welcome to E-Bodies.org Cuda Challenger Forum.
Recent posts
#1
Cars For Sale or Wanted / Re: 1970 Challenger T/A, FE5, ...
Last post by headejm - Today at 10:56:17 AMPrime example of why you should always do the core/radiator support blackout on a repaint. Really bothers me to see the body color showing through the grille. 
#2
I didn't follow anyone else's method, I just did it the way I did it... several hours doing this way...
I masked the Argent and painted the Black first. Then I masked the Black and painted the Argent.
Happy with how it turned out and has lasted since May of 2014 when I did it.
I masked the Argent and painted the Black first. Then I masked the Black and painted the Argent.
Happy with how it turned out and has lasted since May of 2014 when I did it.
#3
Engine, Transmission & Rear End / Re: 8HP70 -> 8HP90 on my '70 C...
Last post by cudaragtop - Today at 09:13:37 AMThe 90 is physically larger than the 70.
I haven't seen a direct side by side comparison of dimensions but the 90 is slightly larger and longer with different rear mounting hole locations. Will require a different driveline than the 70 or modification.
Link to a 70 to 90 swap. Not an E-Body but some useful info.
https://www.ramforum.com/threads/8hp70-to-8hp90-swap-useful-info-for-the-next-guy.189355/
I haven't seen a direct side by side comparison of dimensions but the 90 is slightly larger and longer with different rear mounting hole locations. Will require a different driveline than the 70 or modification.
Link to a 70 to 90 swap. Not an E-Body but some useful info.
https://www.ramforum.com/threads/8hp70-to-8hp90-swap-useful-info-for-the-next-guy.189355/
#4
Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) / Re: What did you do with your ...
Last post by YellowThumper - Today at 08:52:14 AMLetting some project creep sneek in.
Slight detour but still part of "finish everything I touch" mode.
Steering coupler required rebuilding.
Slight detour but still part of "finish everything I touch" mode.
Steering coupler required rebuilding.
#5
Q
Engine, Transmission & Rear End / Re: 8HP70 -> 8HP90 on my '70 C...
Last post by Qda71 - Today at 08:18:55 AM70 is 700nm 90 is 900 nm
#6
G
Cars For Sale or Wanted / Re: 1970 AAR Cuda, B5, auto, ...
Last post by Gary AAR - Today at 08:18:49 AM@TX9AAR
This AAR (BS23J0B302169) is not my restoration. Would love to own a second one, but my only AAR is shown in the photo below.
This AAR (BS23J0B302169) is not my restoration. Would love to own a second one, but my only AAR is shown in the photo below.
#7
Where does it go in The main harness mine are cut and laying on the intake manifold! A diagram or a picture would help alot
God bless
God bless
#8
I didn't have any issues with that link & found the article quite enlightening....Joe
#9
Quote from: MoparCarGuy on May 01, 2024, 08:28:40 PMThe Rocker Panel Gills and the process to paint them from Mopar Connection magazine.Delete this site please. It has fake links that say your computer is locked up due to a virus and you cannot exit from it. But a simple reboot takes care of it.
Also, the pinch weld below the gills is blacked out with flat black.
#10
