Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: 392 Cuda on March 21, 2019, 04:20:57 PM

Title: Does anyone have pics of the wire channels in doors for power windows?
Post by: 392 Cuda on March 21, 2019, 04:20:57 PM
I'm finishing up some of my wiring and need to drill the doors to pass the wires through for power windows.

I would like to drill in the same position that a stock power window car would have.

Does anyone have pics of the door jams on a 71 cuda with power windows?
Title: Re: Does anyone have pics of the wire channels in doors for power windows?
Post by: anlauto on March 21, 2019, 04:37:40 PM
There should be dimples on both the doors and the door posts where the holes get drill the door posts holes are higher then the doors :alan2cents:
Title: Re: Does anyone have pics of the wire channels in doors for power windows?
Post by: 392 Cuda on March 21, 2019, 10:37:47 PM
@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) Thanks for the tip!

I see the dimples on the inside, but the driver door is perfectly flat.

The passenger door does have somewhat of a dimple, almost half way down the door. Does that sound right?
Title: Re: Does anyone have pics of the wire channels in doors for power windows?
Post by: larry4406 on March 22, 2019, 03:07:57 AM
Hope these pictures help.  I saved them off the net from who knows where, so Kudo's to the original poster whomever you are.
Title: Re: Does anyone have pics of the wire channels in doors for power windows?
Post by: anlauto on March 22, 2019, 03:39:23 AM
Perfect pictures  :worship: :twothumbsup:
Text only | Text with Images