E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: Topcat on March 11, 2017, 07:10:53 PM

Title: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 11, 2017, 07:10:53 PM
Spoke with 4speedfish today.

He's needing help finding a decent 70 or 71 Rallye guage cluster.

If you have any leads, PM me.
I'll put you in contact with him.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Cuda Cody on March 11, 2017, 08:29:27 PM
They are out there, but most people are asking a pretty penny for them.  I'll keep my eye open for ya.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: HEMICUDA on March 12, 2017, 04:34:30 AM
I may have 5 or 6 extra sets of gauges.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Slotts on March 12, 2017, 06:08:08 AM
Quote from: HEMICUDA on March 12, 2017, 04:34:30 AM
I may have 5 or 6 extra sets of gauges.

And if you order within the next ten minutes, he will also include a free set of used mounting screws! Operators are standing by...  :twothumbsup:

(Just being your hype man, Mike.)

Jim
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 12, 2017, 08:57:08 AM
Quote from: HEMICUDA on March 12, 2017, 04:34:30 AM
I may have 5 or 6 extra sets of gauges.

He also needs the switch panel too.

Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: HP_Cuda on March 12, 2017, 12:15:05 PM

Yeah I told him it's gonna be tough.

Even when you find a set, you will end up spending about 1000 bucks to get them restored.

Very few I've seen lately even have the clock working or even the Tach.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 12, 2017, 04:03:57 PM
Just about everything for them is being reproduced.

Build it up, piece at a time is an option.   :bigmoney:
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: RUNCHARGER on March 12, 2017, 05:44:55 PM
3 or 4 switch?

Sheldon
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 12, 2017, 05:46:56 PM
90% sure he wants a 3 switch.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: RUNCHARGER on March 12, 2017, 05:52:09 PM
I'll look at mine. Only thing is I have no idea if anything works on mine.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 19, 2017, 05:40:38 PM
Quote from: RUNCHARGER on March 12, 2017, 05:52:09 PM
I'll look at mine. Only thing is I have no idea if anything works on mine.

Spoke with Bob, 4speedfish today.

Turns out he just needs the main rallye cluster.
He already has the plastic lens, plastic housings, and wood grain cover plates.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: RUNCHARGER on March 19, 2017, 06:05:47 PM
That should be a lot cheaper for him.
Title: Re: 70'-71' Rallye Guage Cluster Assembly wanted
Post by: Topcat on March 19, 2017, 06:43:14 PM
I just sent him an e-mail maybe we should make a Spring Fling run in a few weeks.

I would like to go.

It's been since the late 80's I was down there.

We did a tour of the Shelby design &  test center back then.