Print Page - 70 BB Original Corbin Clamps Needed

Title: 70 BB Original Corbin Clamps Needed
Post by: schlett7nu1 on April 19, 2019, 05:15:13 PM

Looking for original Corbin clamps for a 70 BB non-A/C. Originals without stamped numbers. Minor corrosion is ok.
Upper Radiator Hose (2)
Lower Radiator Hose (2)
Heater Hose (4); (2) of each size

Title: Re: 70 BB Original Corbin Clamps Needed
Post by: jimynick on April 20, 2019, 10:14:06 AM

I bought a set of replacement ones and to the best of my ever lessening knowledge, there were no #´s on them. :thinking:

Title: Re: 70 BB Original Corbin Clamps Needed
Post by: schlett7nu1 on April 20, 2019, 02:46:16 PM

Thanks for the info. I looked at several aftermarket supplied clamps and they all had stamped numbers. I'll check with other vendors.

Title: Re: 70 BB Original Corbin Clamps Needed
Post by: Cuda Cody on April 20, 2019, 03:50:42 PM

I didn't think they had any numbers in the repops? These are the round cad type plated hose clamps, right?

E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: schlett7nu1 on April 19, 2019, 05:15:13 PM