How do the a/c vents come out of the dash? Do they screw in from behind or snap in from the front?
I'm so little help on AC, but I know Alan has done a bunch. He should know. :fingerscrossed:
Screws from behind :alan2cents:
Got em out, Had to take apart more of the dash than I had hoped.
Will need to post want ad for a couple of them. Once removed, I found cracks in them I hadn't noticed previously.
I remember reading that some C-Body vents will work also?
I can't remember if the vents are the same. I'm pretty sure the housing foe the dash if different though. There not cheap :crying: I'm have some extras that are good for parts I believe
I'm going to try some epoxy on the rear of the vent housings to firm them up before reassembly. Took em out to put a dash cap on, so this certainly isn't a show quality car.
I think I can repair the housing. I will need one of the louver as the vertical slats are missing.
Thanks for the offer Shoooter, parts may be just what I need. I'll try to get some pics put up soon.