I have a -71 steering column and spring washer was missing. Do someone reproduce them?
Let me know if you guys have an extra one available. :bigthumb:
If you know the measurements McMaster Carr has a pretty good selection..
https://www.mcmaster.com/spring-washers
Are you certain you need the spring? I just rebuilt mine and when I took it apart it didn't have the spring. I asked Cody and he said some didn't have them. Just my 2 cents.
I'm certain the spring is a 1970 only thing :alan2cents:
BTW mine was a 1971 column also.
Quote from: Daveh on June 17, 2019, 12:18:34 PM
Are you certain you need the spring? I just rebuilt mine and when I took it apart it didn't have the spring. I asked Cody and he said some didn't have them. Just my 2 cents.
Good question... My factory book says it should be there but who knows... Column I have was pretty much untouched until I disassembled it and I was surprised washer was missing.
I guess it´s not a huge mistake if I put it back together without it...
Quote from: anlauto on June 17, 2019, 12:40:22 PM
I'm certain the spring is a 1970 only thing :alan2cents:
That´s possible, spring in the picture is from my -70GC column.
hopefully Cody will chime in. I'm sure he has the answer.
If you didn't have one already, you don't need one. Adding it will bind everything up.