E-Bodies.org Cuda Challenger Forum

Does anybody have a correct measurements for where the driver and passenger side Cuda inside door panel emblems should be located?
Thx

Your door panels should be marked on the inside :alan2cents:

Exactly as Alan said there should be two small indentations, just drill them out.

Thanks will have a look.

If not, let me know and I can measure mine.

Quote from: WCC on August 10, 2019, 12:26:08 PM
Thanks will have a look.

If they are not marked, or if you want to double check, I pulled these from the old site when I installed mine.

Thanks really appreciate the measurements just to double check. The marks are very faint.

So ive seen the markings on the back for the 'Cuda emblem, but does anyone know where the Gran Coupe emblems sit? They have three pins rather than the two and seem to be un-marked. I believe if you line up one of the marks, it does look to sit pretty close to some pics i have found.

@dylo (https://forum.e-bodies.org/mlist/dylo_4955) Yes it does set in the same area.  :welcome: From a fellow Gran Coup owner!  :handshake: