E-Bodies.org Cuda Challenger Forum

Technical Shop => Engine, Transmission & Rear End => Topic started by: blown motor on September 13, 2019, 07:41:03 AM

Title: Speedometer gear selection
Post by: blown motor on September 13, 2019, 07:41:03 AM
The speedometer on my Charger is very much inaccurate. Tire size is 275/40/17 which is 26.7" diameter and the rear end has 3.55 gears. Based on the attached chart the 26"/3.55 gear is 36 tooth and the 28"/3.55 gear is the 33 tooth. So I figure the 35 tooth should be about perfect for a 26.7" tire. Agree or disagree?

http://www.mymopar.com/speedometer.htm
Title: Re: Speedometer gear selection
Post by: Burdar on September 13, 2019, 07:45:03 AM
There are a few different charts out there.  This one shows a 34 tooth gear for a 27" tall tire and 3.55 gears.
https://www.forabodiesonly.com/mopar/threads/speedo-gear-calculator.403669/
Title: Re: Speedometer gear selection
Post by: dodj on September 13, 2019, 07:47:49 AM
Sounds good to me.