Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Engine, Transmission & Rear End => Topic started by: floorit426 on November 02, 2019, 08:09:08 PM

Title: New Design Needle and Seat
Post by: floorit426 on November 02, 2019, 08:09:08 PM
One of my AFB carbs is acting up. The car is not idling and seems like one of the floats is not working right.I popped the top off the carb, looking for any debris that might be blocking the needle and seat. I found what looks like a different design, from what I'm familiar with. Has anyone ever seen, or had experience, with a design like this?
Title: Re: New Design Needle and Seat
Post by: Chryco Psycho on November 02, 2019, 11:01:57 PM
Never seen that before
Title: Re: New Design Needle and Seat
Post by: floorit426 on November 03, 2019, 04:39:23 PM
I don't know if they're the problem, but I think they're going to go bye bye.
Title: Re: New Design Needle and Seat
Post by: Topcat on November 03, 2019, 05:45:18 PM
Can't wait to see you back up and running again.  :slapme5:

Time for a Corralito's run Convoy.  :yes:
Text only | Text with Images