Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: Flatdad on December 10, 2019, 08:27:18 AM

Title: Wanted: used set of 426 Hemi pushrods, solid flat tappet, standard length
Post by: Flatdad on December 10, 2019, 08:27:18 AM
As the title says, I'm looking for a used set of 426 Hemi pushrods in standard length for a solid flat tappet. An old factory set is perfectly fine, maybe even preferred. I can do paypal or a check through the snail mail instead. Let me know what ya got!

-Thanks, Dan
Title: Re: Wanted: used set of 426 Hemi pushrods, solid flat tappet, standard length
Post by: Topcat on December 11, 2019, 06:05:38 PM
These aren't used but I felt this is a good price.

https://www.ebay.com/itm/426-Chrysler-Hemi-Push-Rods-Set-Of-16-Elgin-PR-716S-PR-715S-8-Each/202410552902?epid=10022913726&hash=item2f209bee46:g:I4EAAOSw76BbfF8T:sc:USPSPriority!94536!US!-1
Title: Re: Wanted: used set of 426 Hemi pushrods, solid flat tappet, standard length
Post by: Flatdad on December 12, 2019, 04:29:26 AM
That is the cheapest set available & I would have bought them if nobody had a used set. I had it bookmarked already. Fortunately, I've already been contacted & have a factory set on the way for much cheaper!
Text only | Text with Images