Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: fireguyfire on January 03, 2020, 08:04:00 AM

Title: Seam sealer
Post by: fireguyfire on January 03, 2020, 08:04:00 AM
Do you guys usually put your seam sealer back in the factory locations on bare metal, then prime, or prime, then seam sealer?
Title: Re: Seam sealer
Post by: JS29 on January 03, 2020, 08:09:03 AM
@fireguyfire (https://forum.e-bodies.org/mlist/fireguyfire_2964)      I prefer to apply the seam sealer over primer. cured and scuffed.   :alan2cents:
Title: Re: Seam sealer
Post by: 7E-Bodies on January 03, 2020, 09:00:40 AM
Epoxy, then seam sealer for me.
Title: Re: Seam sealer
Post by: Cuda Cody on January 03, 2020, 10:43:51 AM
 :iagree:
Title: Re: Seam sealer
Post by: fireguyfire on January 03, 2020, 10:44:32 AM
[emoji106]thanks gents.
Title: Re: Seam sealer
Post by: kawahonda on January 03, 2020, 11:32:57 AM
I'm about to do etching + seam + primer because I don't want to bust out my gun just for a tiny shot.
Title: Re: Seam sealer
Post by: anlauto on January 03, 2020, 11:47:45 AM
For sure over epoxy..The factory put it over bare steel, or over the body dip primer, either way, there's always rust under the factory seam sealer it seems.
Title: Re: Seam sealer
Post by: JS29 on January 03, 2020, 12:12:13 PM
That is why I apply it over some sort of coating. Rust is common under seam sealer when applied over bare metal.
Text only | Text with Images