Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Interior => Topic started by: MoparMick on January 04, 2020, 09:51:12 PM

Title: Gran Coupe Woodgrain trims
Post by: MoparMick on January 04, 2020, 09:51:12 PM
Hu Guy's
Just recently joined the forum and I know this has been asked several times before but I'm chasing some wood grain trim insert for the
front door trims and rear qtr trims for a 70 Gran Coupe, is there an alternative that someone may have used in the past, I'd prefer
the correct mouldings and realise they're not being reproduced, so anyone out there have a set ?
Thanks guys.
Title: Re: Gran Coupe Woodgrain trims
Post by: JS29 on January 05, 2020, 01:32:22 PM
NO they are not being reproduced. I am not criticizing your car, the seat covers you have are for a standard seat. gran coup seats have horizontal pleats.  :alan2cents: You may want to speak to @TONY (https://forum.e-bodies.org/mlist/tony_147)  from tonys mopar parts, I acquired door panels with red inserts from him. vary knowledgeable, good to work with guy.  :alan2cents: 
Title: Re: Gran Coupe Woodgrain trims
Post by: Fastmark on January 06, 2020, 05:57:18 AM
Pm sent.
Title: Re: Gran Coupe Woodgrain trims
Post by: larry4406 on January 07, 2020, 01:51:56 PM
There was a recent thread on these where one member indicated that someone in Chicago made a strip insert clone but never provided the details so it died...
Title: Re: Gran Coupe Woodgrain trims
Post by: cuda hunter on January 07, 2020, 05:46:16 PM
yeah.  wonder where that thread is. 

Usually you can find a set within a few months of looking and searching.
It took me 4 years to find a complete good set of red inserts.   
Guess I shoulda asked if someone knew where a set was as Tony had a set. 
Quote from: JS29 on January 05, 2020, 01:32:22 PM
You may want to speak to @TONY (https://forum.e-bodies.org/mlist/tony_147)  from tonys mopar parts, I acquired door panels with red inserts from him. vary knowledgeable, good to work with guy.  :alan2cents: 
Did you get a set of automatic or manual? 



mostly bumping your thread.  Hope you find a set of trims.   You'll find em if you keep asking on the forums.   People on here have them.   
Title: Re: Gran Coupe Woodgrain trims
Post by: Blake@diyhemi.com on January 07, 2020, 06:52:02 PM
It was me, I tracked down the company that made the trim.

I need to teach back to my posts and remember what company. It was like 3 years ago


Sent from my iPhone using Tapatalk
Text only | Text with Images