I have both the OEM jack hook and the blue bracket that holds the inflator canister for the space saver spare tire. Both are in poor shape paint wise and need to be stripped and repainted. I need some suggestions as to what brand and color paints most closely match the original gray on the jack hook and the blue on the inflator bracket from those of you that have already done this. The "T" type jack did not come with the car so I just ordered a reproduction from Tony's parts with the gray base and would like the colors to match as closely as possible.
thanks in advance :thankyou:
headejm that's the first thing I did. While I found posts regarding proper installation and requests for pics I didn't find anything about restoring the parts and paint colors using several different search criteria. Apparently I'm not using the correct verbage to find the posts. :dunno:
I took JS29s advice and went to a paint store to try and have them match the paint. Needed to go to three different stores before I found one that could closely match the paints and put in a spray can. Anyway, here are some pics of the parts painted (still wet), after I first media blasted the old paint off and sprayed two coats of etch primer, and the spray cans paint codes for the grey and blue in case somebody else needs to do this also. The blue looks like a dead on match. I can't tell yet with the "dove grey" color. So far it looks a little dark but that part of the shop doesn't have the best lighting and the darkness may be to the etch primer being a very dark grey. I'll have to wait until it drys and take it outside. However, it comes out it's going to be close enough as it will be under the space saver spare and the jack mast stand won't be very visible to compare to. :bigthumb:
:cool: