Does anyone have a picture of the correct seat tracks for a 71 cuda. Everywhere I look online has different ones. are the 70s the same as well because I see listings say 1970 to 1974. does anybody sell the springs and the knob. I have the one piece for the track without the handle.
The top picture are 70-71, the bottom picture is the later ones. I'm not sure when the eliminated the cross over cable and the locking arm on the inside track. :thinking: Either or, once mounted in the car they will work the same :alan2cents:
So the bottom set would work if the springs are put on it? The other side of the track just wont lock? I might have to do that till I can find a set
Yea, for sure, you just need the long black spring and the small yellow spring and you're good to go !
Anyone sell those ?
I have lots of the large black ones, maybe some used yellow ones...I'll have a look tomorrow....
I know the yellow ones are sold separately :thinking:
Shooter....here's what I found in my junk pile....sorry I could only come up with one used yellow spring, but they are available separately in reproduction.
I might have one yellow spring. I'll check when I get home
I have the one yellow one but that's all I have
Do you want the ones I have ?
PM me your address and I'll send them to you for FREE buddy....
You just have to be my friend :haha: :haha: :haha: :haha:
PM sent Al. Thanks
Quote from: anlauto on February 10, 2020, 06:48:56 PM
Do you want the ones I have ?
PM me your address and I'll send them to you for FREE buddy....
You just have to be my friend :haha: :haha: :haha: :haha:
You must be the Canadian version of don Corleone!