Looks cool But.. Column shift kills it for me. and does the vin tag look a little off?
https://www.ebay.com/itm/1971-Plymouth-Cuda/143528011693?hash=item216aefa7ad:g:64kAAOSwy9ZeP4vU
I don't know about the vin tag but the fender tag looks a little fake lol. Somebody with a blindfold on must have installed that Cuda emblem on the tail panel. :haha:
Sure has a ton of pictures, I'll give him that! :bradsthumb: I'm no expert but the shaker assembly seems a little low? Pretty car though.
The hole car looks a little off to me! :drunk:
The whole shaker assembly internals are missing. Maybe an added N96 fender tag. Not a high feedback seller.
vin tag drivers side rivet shows where a drill was used to get the old rivet out. They touched the tag with the end of the drill.
I can see the roof line through the vinyl top.
Looks like the shaker is off 1" to the drivers side.
That's a very clean looking fender tag.
the fender tag is a bad attempt at a replacement :clapping: wonder what the combo was originally?
Quote from: 6bblgt on March 02, 2020, 09:11:11 PM
the fender tag is a bad attempt at a replacement :clapping: wonder what the combo was originally?
With out a real build sheet, It's all speculation. :thumbdown:
The car has a 22 inch radiator in it. That plus the fake tag equals re-body.
Quote from: E74cuda on March 03, 2020, 07:34:21 AM
The car has a 22 inch radiator in it. That plus the fake tag equals re-body.
good point, didn't all 340's get a 26'' radiator? :foul: