Print Page - ??Little screw that holds the hood pin lanyard to the body

Title: ??Little screw that holds the hood pin lanyard to the body
Post by: Rutro on April 08, 2020, 07:40:57 AM

Are the 2 little screws used for the hood pin lanyard regular sheet metal screws? This is what I see in the kits
I have some screws (not sure where they came from) that have a shoulder that fits the lanyard end and allows the cable to swivel.
Help? which screw is factory correct. Thanks

Title: Re: ??Little screw that holds the hood pin lanyard to the body
Post by: anlauto on April 08, 2020, 08:23:25 AM

At one point consoles had a cable with special screws that allowed the cable to swivel out of necessity, but ALL the hood pin cables I've come across just use a standard sheet metal screw :alan2cents:

Title: Re: ??Little screw that holds the hood pin lanyard to the body
Post by: SgtSuperbird on April 08, 2020, 08:29:39 AM

My T/A and Bird both have fixed lanyards, with the sheet metal screw. As for the finish, who knows? My current and former bird had polished screws, the T/A appears to be the black phosphate type.

Title: Re: ??Little screw that holds the hood pin lanyard to the body
Post by: SgtSuperbird on April 08, 2020, 08:32:28 AM

Forgot to attach the pic of the T/A...

Title: Re: ??Little screw that holds the hood pin lanyard to the body
Post by: Rutro on April 08, 2020, 08:39:16 AM

Thanks guys
I forgot about the console cable.
Y'all are awesome as always

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: Rutro on April 08, 2020, 07:40:57 AM