Print Page - 15x10 with Ebody width rear (sprin relo + 6.25" bs)

Title: 15x10 with Ebody width rear (sprin relo + 6.25" bs)
Post by: dave73 on May 13, 2020, 11:39:43 AM

I've seen a few posts on here but I can't find them now. Getting a Dr. Diff 1" spring relocation kit, welding onto an ebody width rear. I'm measuring/reading that I can then fit a 15x10 with 6.25" backspace. Does that make sense to everyone?

Title: Re: 15x10 with Ebody width rear (sprin relo + 6.25" bs)
Post by: HP2 on May 13, 2020, 02:20:51 PM

Sounds about right. 66-67 B housings use 5", 68-70 B housings use 5.5", All E housings use 6.25"

E-Bodies.org Cuda Challenger Forum

Technical Shop => Wheels, Tires, Brakes, Suspension & Steering => Topic started by: dave73 on May 13, 2020, 11:39:43 AM