E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: challengermaniac on July 15, 2020, 02:11:57 PM

Title: Decal Remover
Post by: challengermaniac on July 15, 2020, 02:11:57 PM
Hi everyone,

Did a search, although did see anything as yet on best practices for removing decals while protecting the painted surface.. 

Please share your experiences.
Title: Re: Decal Remover
Post by: anlauto on July 15, 2020, 02:17:27 PM
3M Decal and adhesive remover :bigthumb:
Title: Re: Decal Remover
Post by: Daveh on July 15, 2020, 02:17:58 PM
These work well.

https://www.eastwood.com/replacement-eraser-wheel-with-hub-for-30216.html

They have the same ones on Ebay for much cheaper but I couldn't copy the links they were way too long.  Just look up decal eraser and you will see all of them. 

Good luck.
Title: Re: Decal Remover
Post by: Fastmark on July 15, 2020, 03:35:24 PM
I've used them but be careful. Go slow speed or you will burn the paint.
Title: Re: Decal Remover
Post by: Matt M on July 15, 2020, 05:06:20 PM
This what I used Rapid Remover
It took off decals that had been on my car for over 20 years.

Put it on the decal, let it set for a couple minutes and scrape it off with a plastic blade.
Re-apply the solution on the decal glue residue  and scrape again. It came right off.
Did not effect the paint at all.

I was amazed at how well it worked