E-Bodies.org Cuda Challenger Forum

as always to busy to work on my cars but as always knowledge from others saves time . few pics of what I've got going on, I'll start some posts of the resto's  if i can find time, 

so my question is the challenger has the reverse light wire feeding threw the fire wall ,which in many diagrams it calls for the tach wire, im assuming it goes in the empty bottom spayed in the bulkhead connector for the engine harness ? of course that is the only harness i replaced and i guess i might have overlooked that because i did have the single wire through fire wall ? like i said others knowledge prevents smoke lol

Welcome to the forum @moparx5 (https://forum.e-bodies.org/mlist/moparx5_8600)   :welcome:  Great cars!  :clapping:

What wiring harness did you use to replace the old harness?  This has some good info...

https://forum.e-bodies.org/electrical-and-audio/11/colored-wiring-diagrams-70-cudachallenger/1349/