Hey all, I'm doing this for a friend over on the Facebook side. Some of you may have seen his posts. His name is Travis Sparks and he's doing an amazing bronze colored Challenger. Very talented guy. He helps cancer stricken families and is himself a survivor that still copes with the after affects. He's looking for something that should be very simple for anyone with extra steering column parts laying around. He needs the part he terms as "the spring washer in a 74 challenger steering column, some people call it a wavy washer". If someone has one, I'd pay them and the shipping to him on the east coast. He's just that good of a guy that helps everyone he can. Can anyone help?
I may have 1. I will look tonight after work. Ping me this evening if I haven't gotten back to you, sometimes I forget things...
Since this washer is not under a lot of stress or pressure, should be easy to make one if you need.
I'd gladly make one for this guy if someone would kindly sketch out the dimensions. Would they possibly be the same dimensions all 5 years?
I found one, in my junk drawer. The dimensions are hard to take, given the curved nature, of the part. Here is what I came up with:
Outside diameter- 1.800 inches
Inside diameter - 1.50 inches
Width of band - .160 inches
Metal thickness - .30 inches
The math does not add up, exactly, but that is what I came up with.
What exactly is the function, of this part? If I don't need it, I'll be happy to send it. I am unsure of the year column that it came out of.