E-Bodies.org Cuda Challenger Forum

Technical Shop => Engine, Transmission & Rear End => Topic started by: Car-nutt on May 21, 2017, 10:36:44 AM

Title: Six Pack Vacuum Hose Routing
Post by: Car-nutt on May 21, 2017, 10:36:44 AM
My engine is finally on the dyno. Its a 440 SIx Pack, I have ordered a cam from Mr. Six Pak. I need a six pack vacuum hose diagram. I think the vacuum hoses are installed wrong, as the outboard carbs are closing at full throttle. Any help would be appreciated.
Title: Re: Six Pack Vacuum Hose Routing
Post by: 1 Wild R/T on May 21, 2017, 10:42:13 AM
Pretty simple, the outboard carbs only have one nipple... The center car has two, one is in the same location as the outboards, connect all three together... The second nipple on the center carb is vacuum advance....
Title: Re: Six Pack Vacuum Hose Routing
Post by: anlauto on May 21, 2017, 01:45:42 PM
 :iagree: I agree with Mr. Wild...pretty simple :alan2cents: