Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: CudaHead on February 04, 2021, 02:22:01 PM

Title: Challenger A/C Blower Motor Removal
Post by: CudaHead on February 04, 2021, 02:22:01 PM
On a non A/C car you have to remove the whole box to remove the heater blower motor.
It appears to be a different setup on an A/C box.
Can you remove the blower motor on an A/C car without taking the box out?   (from the engine compartment)
It looks like you just take the three nuts off and the motor will come out.
Not so sure the wheel will comes out with it.
Anyone have experience with this?
Title: Re: Challenger A/C Blower Motor Removal
Post by: anlauto on February 04, 2021, 02:41:31 PM
Yup...comes right out :bigthumb:
Title: Re: Challenger A/C Blower Motor Removal
Post by: CudaHead on February 04, 2021, 02:42:14 PM
Thank You!
I have to get in there. There was a mouse nest inside the box. It caught fire when I turned on the heater. I'm trying to get it out of there to clean up.
Text only | Text with Images