I just got some new heater hoses and checked on line to id the heater hose from the ac hose firewall connector. Looking on line I noticed there are at least two locations for the heater hoses. One to the right of the heater blower and one to the left. Seems like an odd thing and it would be simpler and cheaper just to have a single location. Anyone know why?
Also, are the heater blowers different?
Just currious.
One location for AC cars and one for non-AC ?
Not sure. The attached photo would suggest otherwise, unless it was modded. Mine has a/c.
Here are the photos I forgot to attach with some examples
Blower motors are different and heater hose locations are different between AC and Non-AC cars.
The heater boxes are different between AC and Non-AC cars. AC heater boxes have both the evaporator and a heater core in them.
Red engine compartment is a b-body
Yellow engine compartment is e-body non-AC
Orange paint firewall image is e-body non-AC
Yellow firewall is e-body with AC
Thanks. I was looking at a lot of photos of ebodies on google images and this one snuck in. I just looked at the hoses and didn't look at the engine bay or rest of cowl. Opps. It was that photo that got me curious, I should have looked closer.