E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: 7E-Bodies on May 03, 2021, 03:34:34 PM

Title: Rear Window Upstop Bracket Location Measurement Info
Post by: 7E-Bodies on May 03, 2021, 03:34:34 PM
Just sharing some photo documentation and measurements on the rear window (quarter glass) upstop bracket location measurements after member @Yeya93 (https://forum.e-bodies.org/mlist/jaramillo1993_6469) inquired. It just so happened my left quarter was only clamped and sheet metal screwed for alignment, so I was able to remove it to lend a hand to the topic as it'd probably be pretty hard to find that info. This is a 70 Challenger RT, left side, and it's very unmolested except for my removing the original quarter due to some 1980's patching that had to go. If anyone wants further measurements or photos, or enhancements to this thread, better shout quickly as I'll be welding soon. Also @Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) feel free to rename this title for easier search results in our database. I'd hate to be stuck head scratching on installing one of these buggers with no info. Also know that reproduced quarters (mine are AMD) had missing or poorly located slots (3) for the chrome and rubber trim piece that will need to snap in later, so some precision measurements and drill/cut action will be required (I laid out a piece of masking tape over the originals, marked it, then peeled it off to lay onto the new quarter). Hoping this helps others.
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: Cuda Cody on May 03, 2021, 03:41:29 PM
 :clapping:
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: Yeya93 on May 03, 2021, 06:04:53 PM
I guess what matters in the end is if this bracket makes contact with the little weld in the end correct?(https://uploads.tapatalk-cdn.com/20210504/6e23d64eac3aee0cfa7e6c685db5ede6.jpg)(https://uploads.tapatalk-cdn.com/20210504/d00d2dc541d15a52840c4867de369cbb.jpg)

Sent from my Pixel 5 using Tapatalk

Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: anlauto on May 03, 2021, 07:43:03 PM
Yes, correct :twothumbsup:
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: 7E-Bodies on May 03, 2021, 07:50:10 PM
@Yeya93 (https://forum.e-bodies.org/mlist/jaramillo1993_6469) I can get a picture of that part depicted by your arrow in the morning, if you need it. Mine will definitely be all factory. Let me know. I probably need to add that to this thread anyway for future users.
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: Yeya93 on May 03, 2021, 07:59:42 PM
@7E-Bodies if you could just take a general picture from the inside. That would be nice just for reference please.

Sent from my Pixel 5 using Tapatalk

Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: 7E-Bodies on May 04, 2021, 08:21:19 AM
Here you go @Yeya93 (https://forum.e-bodies.org/mlist/jaramillo1993_6469)
I laid an extra tack weld in a few spots on mine as I was a bit leery of the poor quality spot welds from the factory and didn't want one coming off after the car was completed. If you want more pics and info, don't be shy.
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: 7E-Bodies on May 04, 2021, 08:23:13 AM
Apologies for the pics somehow getting rotated. Very frustrating   :pullinghair: Not sure how that happens.
Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: Yeya93 on May 04, 2021, 12:30:34 PM
@7E-Bodies thanks for those pics. I think i have everything under control. But one thing I'm not too sure about is if this piece supposed to be tack welded somewhere or not. Been searching around but can't find a good picture. (https://uploads.tapatalk-cdn.com/20210504/45b7ad4a9c50b985ea6ce76e53b0d1a3.jpg)

Sent from my Pixel 5 using Tapatalk

Title: Re: Rear Window Upstop Bracket Location Measurement Info
Post by: 7E-Bodies on May 05, 2021, 08:59:08 PM
Two factory spot welds