E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: xx88man on August 16, 2021, 10:45:43 AM

Title: Hood swap… bodyman tips
Post by: xx88man on August 16, 2021, 10:45:43 AM
I picked up a rallye hood from a friend. Great deal and the paint matches my car. Problem is trying to get it mounted properly. I DID NOT loosen or remove the hinges at all. I had help pulled out the bolts and put the new hood on the hinges. I can't seem to get the hood to sit far enough forward. Needs to come forward approximately 3/8" but it's completely out of adjustment on the passenger side only. Still have adjustment on the drivers side. Any tips here? TIA
Title: Re: Hood swap… bodyman tips
Post by: headejm on August 16, 2021, 11:16:00 AM
Lots of discussions on here about hood adjustment. Here are a couple of suggestions.
Title: Re: Hood swap… bodyman tips
Post by: xx88man on August 16, 2021, 01:59:08 PM
I was figuring if the flat hood fit well this one should without adjusting the hinges?  :notsure: