Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: VCODE on August 18, 2021, 03:44:25 PM

Title: Wire Harness Bracket / Holder (FOUND)
Post by: VCODE on August 18, 2021, 03:44:25 PM
FOUND
Looking for a 70 E-Body wire Harness Bracket. It's attached to the left side rear floor panel which holes the wire harness in place going to trunk.
Title: Re: Wire Harness Bracket / Holder
Post by: 70 Top Banana on August 24, 2021, 04:47:14 PM
It is one bracket and not two, correct? I will look when I get to the shop. Can't promise but I will look. If I have one you can have it for the shipping.
Title: Re: Wire Harness Bracket / Holder
Post by: anlauto on August 24, 2021, 05:22:07 PM
There's one on each side but they're both different. :alan2cents:
Title: Re: Wire Harness Bracket / Holder
Post by: VCODE on August 24, 2021, 05:47:39 PM
Quote from: 70 Top Banana on August 24, 2021, 04:47:14 PM
It is one bracket and not two, correct? I will look when I get to the shop. Can't promise but I will look. If I have one you can have it for the shipping.

It is the one on the left side.
Thanks Bob
Text only | Text with Images