E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: B5fourspeed on October 23, 2021, 06:01:24 PM

Title: 4 speed dash reverse light
Post by: B5fourspeed on October 23, 2021, 06:01:24 PM
How do you get the bulb out of the housing on the reverse light
Title: Re: 4 speed dash reverse light
Post by: anlauto on October 23, 2021, 06:35:28 PM
The socket just pulls straight out the back of the housing....always a pretty tight fit  :alan2cents:
Title: Re: 4 speed dash reverse light
Post by: B5fourspeed on October 23, 2021, 06:44:24 PM
Thank you.I did not want to start tugging until I got some info.
Title: Re: 4 speed dash reverse light
Post by: anlauto on October 23, 2021, 07:34:52 PM
TIP: Don't pull on the wire, get some pliers and carefully twist and pull on the small edge on the bulb socket.  :alan2cents: