I was looking at the build sheet and the fender tag on my car. Fender tag says B14 (14 day November 1969). The Build sheet says the vehicle build sequence is 2076702 which the decoder says is April 1, 1970.
Is this something others find? Any way of knowing what the real build date is?
Thanks in advance for any insight!
Randy
Can you post your broadcast sheet? The broadcast sheet should have the same Scheduled Production Date (SPD) from the fender tag as the first three digits of the VEHICLE ORDER NUMBER section on Line 1. Your door VIN decal may have 11 - 1969 for the build date as well.
All three should be close as the door VIN decal could vary from the SPD month if the car was assembled earlier (previous month) or later (next month). Since your SPD is B14 which is mid-month, they all could be November 1969 like the example below with 406 or April 6th, 1970.
<Edited to correct the SPD to 11 - 1969>
:popcorn:
https://forum.e-bodies.org/vin-fender-tag-build-sheet-and-date-codes/13/actual-production-date-vs-scheduled-production-date/810/
I have a good chunk of LINE #1 (A-bodies, Barracudas & Challengers) figured out & a portion of LINE #2 (A-bodies & Challengers) figured out
I wasn't aware there was anything on the decoder that shows an Actual Production Date :clueless:
@Aloha Randy (https://forum.e-bodies.org/mlist/aloha-randy_11872) post or email (dhead68@hotmail.com) a pic of your sheet, I'll get you in the ballpark - do you have an original door sticker?
Ok, here is the build sheet. When I put the number in the decoder, it says build April 1, 1970. The door tag is a re-pop when the car was painted. I can assume the tag was duplicated correct but I don't want to assume. The fender tag in the decoder says November 14, 1969.
So, I am mainly confused on the 4 1/2 month difference from build sheet to fender tag. Any ideas?
Thanks!
that is NOT an authentic broadcast sheet :('
You can see on Line 1 of the decoder that it states the build date, FYI.
Thanks!
I think there's a reason why the broadcast sheet says April 1st... :yes: :rofl: :rofl: :rofl:
The sequence number is the one all the way to the bottom right, 191465 and that is the last six digits in the VIN. The 2076702 number is the order number, seven digits. So that number looks about right. :alan2cents:
So I know, what tells you this is not a authentic build sheet? I was always suspect of this but I could not be sure one way or the other. Thanks.
Quote from: Aloha Randy on April 07, 2022, 04:32:36 PM
So I know, what tells you this is not a authentic build sheet? I was always suspect of this but I could not be sure one way or the other. Thanks.
look at the fonts compared to the sheet posted above & all the info is in the wrong location or just wrong - I'm sure the 4/1 was intentional as "done for novelty purposes"
FWIW the fender tag appears to be legit! :twothumbsup:
The fonts are what I did not like and why I had concerns. Thanks!
Also if you look at the paper drive holes on the side they and uneven.
Food for thought. Your Challenger broadcast sheet would not be the multicolor version, it would be the single color like below during that production timeframe (NOV 1969).