E-Bodies.org Cuda Challenger Forum

Technical Shop => Interior => Topic started by: Aloha Randy on April 08, 2022, 08:42:35 PM

Title: Wood Grain Dash Kit
Post by: Aloha Randy on April 08, 2022, 08:42:35 PM
I purchased a wood Grain replacement kit for my Ralley Dash from Classic Industries. It came without instructions and I was wondering what adhesive you have used to mount this to the underlying plastic panel? Thanks for your insight. Randy
Title: Re: Wood Grain Dash Kit
Post by: anlauto on April 09, 2022, 05:38:52 AM
The wood grain glues to metal plates, usually a good contact adhesive will do the trick.
The metal plates have tabs on them that slide into slots in the plastic house, then you twist or fold over the tabs.
The wood grain does not glue to the plastic housing :alan2cents:
Title: Re: Wood Grain Dash Kit
Post by: anlauto on April 09, 2022, 06:13:31 AM
Member Floyd has the metal plates for sale if you don't have any..  :bigthumb:
https://forum.e-bodies.org/parts-misc-for-sale/9/1972-74-rallye-dash-fascia-set/24869/
Title: Re: Wood Grain Dash Kit
Post by: Aloha Randy on April 09, 2022, 02:41:52 PM
Ok, I have not fully disassembled them and did not know I have to pry the metal plate off and then reglue. Thanks