Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Jsand73440 on May 21, 2022, 11:48:38 AM

Title: 70 challenger bumper filler
Post by: Jsand73440 on May 21, 2022, 11:48:38 AM
Does anyone have pictures of how the bumper filler metal strip is installed? Does the bumper need to be installed first before for mock up, and then removed? It appears to be screwed on with 6 or 7 screws. If it goes where i think it goes, it is slightly too long and doesn't really curve to follow the tail panel real well. If I leave it off, how bad is the gap?
Title: Re: 70 challenger bumper filler
Post by: Rich G. on May 22, 2022, 01:30:29 PM
The filler panel just screws on. I went to take a picture of it for you but what the bumper on I can barely see it! LOL
Title: Re: 70 challenger bumper filler
Post by: EV2RTSE on May 23, 2022, 11:32:19 AM
Here are a few pics-
Title: Re: 70 challenger bumper filler
Post by: Jsand73440 on May 28, 2022, 10:28:13 AM
Thanks for the pic's. Very helpful
Title: Re: 70 challenger bumper filler
Post by: anlauto on May 28, 2022, 10:29:07 AM
Yea, I don't think you would want to run without it  :dunno:
Title: Re: 70 challenger bumper filler
Post by: PLUM72 on August 31, 2023, 11:19:44 AM
Digging this post up...Anyone have a photo of the bumper filler with the bumper in place?  On a 70 Challenger of course...

Thanks!
Title: Re: 70 challenger bumper filler
Post by: 71GranCoupe on August 31, 2023, 12:41:41 PM
Hard to get a good picture, but if you look closely, you can see the line from the back of the body to the filler. It is buried under the bumper.
Text only | Text with Images