E-Bodies.org Cuda Challenger Forum

Classifieds => What's It Worth? => Topic started by: GrandpaKevin on July 04, 2022, 10:01:56 AM

Title: WIW B body Dana 60 with E body perch width
Post by: GrandpaKevin on July 04, 2022, 10:01:56 AM
Pulling more parts out of the back of the garage that will probably be for sale.

This is a B body Dana 60 rear end that I bought back in the 90's and never used, it's been stored inside ever since.

Tube stamping is 602957 2 which should be a 68-69 B body rear with Powr Lok diff and 3.54 gear.

I think it's an earlier version as it has the drain plug on the bottom.

Spring pads were moved out to E body width by previous owner as the rear was under a Challenger.

The 3.54 was replaced with 4.10, the Powr Lok diff is still there

Stock axles and studs.

Inside looks great with lube still present, teeth look new. Spins freely.

Exterior would be an easy clean up with minimal scale and surface rust.

So what's it worth?

Thanks.



Title: Re: WIW B body Dana 60 with E body perch width
Post by: Brads70 on July 05, 2022, 03:27:56 AM
Just a guess but I'd say 2-3K ?
Title: Re: WIW B body Dana 60 with E body perch width
Post by: ogre on July 06, 2022, 12:56:42 PM
if its a real B body not a converted truck model, and only to bad its missing the 3.54 but still worth way more than I could spend, 3-4k .
Title: Re: WIW B body Dana 60 with E body perch width
Post by: GrandpaKevin on July 06, 2022, 02:13:39 PM
Yes it's a real 68-69 B body Dana with snubber mounts and stampings on the axle tube.

Thanks.