I bought a set of brake lines from Fine Lines, a company that is probably less than 5 miles from my house. When my boy went to pick them up, they had boxed them for shipping :( He got them home, unboxed them then un-bent the shipping bends. He proceeded to install the front to rear line based on the poster that we picked up at Carlisle last summer. It shows the entire underside of a 70 Challenger with everything in the factory locations. He installed the line based on the shape of the bends and the picture that we had to follow. When he got to the rear, there was way too much line left. We assumed that most likely it was installed wrong or possibly made wrong. Mike stopped by today and got me all straightened out in less than 30 seconds. I know that there is some controversy around Mike that I don't want to be in the middle of, but he has helped me over and over again as he is only about 20 minutes away from me. I am thankful to have him as a local resource and as a friend.
So was the line wrong, or was your attempt and installing it wrong ? :dunno:
Glad to hear that you got it sorted out. :pixiepop:
We did not install it right. One of the bends near the front was not bent correctly. Most likely due to incorrectly straightening out shipping bends.
Ahhh....yea that will get you every time :twothumbsup:
Mike is awesome!