Can anyone tell me what these connectors might be for? They are both hanging down under the dash in the vicinity of the steering column. The first is 2 wires black and white with a connector for 2 flat spade terminals at 90 degrees. The second is 3 wires. Grn/wht, yel/wht (maybe its org/wht?) and pink. The connector has sockets for 3 round pins. See attached pics. The 2 wire is much longer than the 3 wire.
This is a 70 Challenger.
The first picture is for the rear defrost and was plugged in behind the drivers side kick panel. The second and third picture is coming off your turn signal switch in the steering column for corning lights your car doesn't have. You have a cbody turn signal switch in the column, it will work fine, just tape off the plug.
I agree the 3 wire is std on replacement turn signal switches meaning the original has been replaced at some point & the 3 wire plug is not used for E body cars